As a AC Installation In Los Altos satisfies all residential and commercial cooling challenges with durable equipment, progressive technology, user-friendly operation, and outstanding efficiency. We’re happy to answer questions, explain options and provide knowledgeable recommendations. Every aspect of the job is handled with transparency and straightforward commitment to your best interests.

he installation of the split air conditioners is a crucial job. If the installation is done accurately your air conditioner will give optimum cooling, but if it is not done properly you won’t get the desired cooling effect. A poor installations also leads to frequent maintenance problems.

Several factors have to considered during the installation of split air conditioner.

1. Strength of wall to hold the AC

The indoor unit of split AC must be installed on a wall strong enough to hold the unit’s weight.

2. Proper spacing between wall and AC unit

The indoor unit of split AC requires at least 15 cm of open space surrounding its top and sides for proper air flow.

3. Appropriate installation height from ground

Mount the indoor unit of split AC at a height of 7-8 feet above the ground for adequate cooling inside the room

4. Correct tilt angle of indoor unit

While fixing the aluminum bracket on wall make sure that the bracket is given a slight tilt angle, so that the indoor unit of split AC, when fitted is also at a slight angle to enable unrestricted flow of the condensed water from the drain pipe.

5. Correct location of outdoor unit

For proper cooling, mount the indoor and outdoor units of split AC at location away from direct sunlight and water. Install the outdoor unit of split AC in open space so that there is no hindrance to the heat dissipated from the condenser.

6. Proper placement of outdoor unit

The outdoor unit of split AC must be placed on a flat and rigid surface. This unit contains key components of split AC like compressor, condenser, fan motor etc. If the unit is not on a flat surface then it will vibrate excessively, which can lead to the breakage of copper pipes, coolant leakage and compressor/condenser damage. Further, the vibrating unit makes lots of noise which could disturb you and your neighbors.